02-805-5888   info@summitindustech.com

02-805-5888
info@summitindustech.com

ALL CATEGORY

PRODUCT

Coil Finned Heaters

Brand : SAKAGUCHI
Category : Heaters
SKU : Coil Finned Heaters

◼Features

● By winding a fin in a coil form (helically) around a straight heater, the heat efficiency has been further improved due to the increased heat release area.
● Heaters of this type are durable, and best suited for heating gas.
 

◼Specification

Configure of standard types

Square and Rectangle Configure of standard types
  • Iron coating with heat-resistant silver powder is used for the sheath and fin materials.
  • Mounting hardware for the heaters is also available.

Specification

All products listed are available in different voltages.

Model Voltage Wattage L A B φD Sheath diameter Product code
100V 115V 200V
F-1 100/115/200V 300W 270mm 210mm 30mm φ28 φ12 F1100 F1115 F1200
F-2 100/115/200V 300W 450mm 390mm 30mm φ28 φ12 F2100 F2115 F2200
F-3 100/115/200V 500W 300mm 240mm 30mm φ28 φ12 F3100 F3115 F3200
F-4 100/115/200V 500W 340mm 280mm 30mm φ28 φ12 F4100 F4115 F4200
F-5 100/115/200V 500W 500mm 440mm 30mm φ28 φ12 F5100 F5115 F5200
F-6 100/115/200V 750W 390mm 330mm 30mm φ28 φ12 F6100 F6115 F6200
F-7 100/115/200V 750W 650mm 590mm 30mm φ28 φ12 F7100 F7115 F7200
F-8 100/115/200V 1000W 570mm 510mm 30mm φ28 φ12 F8100 F8115 F8200
F-9 100/115/200V 1000W 950mm 890mm 30mm φ28 φ12 *FX F9115 F9200
F-10 100/115/200V 333W 270mm 210mm 30mm φ28 φ12 F10100 F10115 F10200
F-11 100/115/200V 333W 450mm 390mm 30mm φ28 φ12 F11100 F11115 F11200
F-12 100/115/200V 667W 360mm 300mm 30mm φ28 φ12 F12100 F12115 F12200
F-13 100/115/200V 667W 600mm 540mm 30mm φ28 φ12 F13100 F13115 F13200
F-14 100/115/200V 833W 480mm 420mm 30mm φ28 φ12 F14100 F14115 F14200
F-15 100/115/200V 833W 800mm 740mm 30mm φ28 φ12 *FX *FX *FX
F-16 100/115/200V 1330W 750mm 690mm 30mm φ28 φ12 *FX *FX *FX
F-17 100/115/200V 1330W 1000mm 940mm 30mm φ28 φ12 *FX *FX *FX
F-18 100/115/200V 1660W 710mm 650mm 30mm φ28 φ12 *FX *FX *FX
F-19 100/115/200V 1660W 1250mm 1190mm 30mm φ28 φ12 *FX *FX *FX
F-20 100/115/200V 2000W 950mm 890mm 30mm φ28 φ12 *FX *FX *FX
F-21 100/115/200V 2000W 1380mm 1320mm 30mm φ28 φ12 *FX *FX *FX
F-22 200V 3300W 1250mm 1190mm 30mm φ28 φ12 *FX *FX *FX
F-23 200V 3300W 1450mm 1390mm 30mm φ28 φ12 *FX *FX *FX
F-24 200V 5000W 1750mm 1690mm 30mm φ31 φ15 *FX *FX *FX
F-25 200V 5000W 2200mm 2140mm 30mm φ31 φ15 *FX *FX *FX

* FX（Made-to-Order）

* Note that the allowable current of available heaters is 25 A or less.

How to connect the wires

When using your heater, at 200 V, connect the wires using one of the connecting methods shown below.
(Heaters constructed from stainless steel are also available.)

Y connection(Star connection)

Y connection
(Star connection)

Δ connection(Star connection)

Δ connection
(Star connection)

Series connection

Series connection

◼Precautions when using this product

●This product is for industrial use only.
●Do not use the product without ventilation.
●Do not use the product at a voltage exceeding the rated voltage.
●Use the product in an atmosphere where the ambient temperature around the heater terminal does not exceed 150℃.
●The heater becomes hot during us and still hot immediately after power off. Never touch a hot heater with bare hands.

Share

Related Products