SUMMIT INDUSTECH || HBA-21 / HBA-22 Heater break alarm module

Heater break alarm module
HBA-21 / HBA-22

Brand : RKC

Category : Controllers

SKU : HBA-21 / HBA-22 Heater break alarm module

Main features

HBA-21(For relay contact)

Heater break alarm supporting control system where proportioning cycle time of the temperature controller is long (20 seconds or more).
Supported CT: CV-1
Use of two pairs of CTs enables this device to be used for three phase heater.

HBA-22 (for relay contact and SSR drive outputs)

Heater break alarm supporting control system where proportioning cycle time of the temperature controller is short (approximately 2 seconds or more).
Supported CT: CTL-6-P-□
Use of two pairs of CTs enables this device to be used for three phase heater.

Main specification

HBA-21 (for single phase, relay contact output system)

Input type: Current transformer (CV-1-□)
Detectable load current: 5A, 30A, 100A ac (depends on CV-1 rating)
Settable range: 10 to 100% of CV-1 rated value
Alarm range: when current changes by 10% or more of the CV-1 rated value (full scale).
※ When the current change is smaller than 10%, the action is uncertain.

HBA-22 (Single phase SSR drive)

Input type: Current transformer (CTL-6-P-□)
Detectable load current: 5A, 10A, 20A, 30A (depends on CTL-6-P)
Settable range: 5A: 20 to 100% of rated value of CTL-6-P
10A, 20A, 30A: 50 to 100% of rated value of CTL-6-P
Alarm sensitivity: when current changes by 15% or more of the rating value (full scale) of the used CTL-6-P set value.
※Action is uncertain for changes within 15%.

Alarm output: 2 points, Relay contact, 1a contact
Supply voltage: 100/110V or 200/220V, (whichever is specified), 50/60Hz
Power consumption: 1.8VA or less
Ambient temperature: -10 to 50°C