AUTONICS
● Dual display for simultaneous display of process value (PV) and setpoint value (SV)
● Pressure measurement of any gas, liquid or oil (except substances which may corrode stainless steel 316L) [fluid type]
● Switch between NPN and PNP open collector output via parameter configuration
AUTONICS
● 5.6-inch TFT color LCD (640×480) touchscreen display with excellent visibility and intuitive control interface
● Supports 27 input types (thermocouple, RTD, analog voltage and current[shunt])
● 25 to 250 ms high-speed sampling, 1 to 3600 s recording cycle
AUTONICS
● Counting speeds: 1 cps / 30 cps / 2 kcps / 5 kcps
● Switch between voltage input (PNP) and no-voltage input (PNP) using DIP switch
● Operation modes: count-up, count-down, count-up/down
AUTONICS
● High accuracy digital pressure sensor
● Bright red LED display (character height : 9.5 mm)
● Various output modes : hysteresis mode, automatic sensitivity adjustment mode, independent 2-point output mode, window comparison output mode
AUTONICS
● Integrated counter/timer unit for counting and timing applications
● RS485 (Modbus RTU) communication (communication models)
● One-shot output time: 0.01 s to 99.99 s
AUTONICS
● 110/220 VAC dual voltage
● NPN/PNP input switch
● High contact capacity (250 VAC, 3A resistive load)
AUTONICS
● Display 8 (PSM8) or 4 (PSM4) channels of pressure value from analog pressure sensors
● Input range: 1-5 VDC, DC 4-20 mA (by model)
● Pressure sensor model auto recognition (Autonics PSS series pressure sensors)
AUTONICS
The E15S incremental rotary encoders are ultra-compact in size (Ø15 mm) and ultra-lightweight (14 g).
Read More >
AUTONICS
● Horizontal/vertical installation
● Various communication interface support: RS232C, RS422/485, Ethernet
● Device monitoring of connected device possible without screen data
AUTONICS
● LCD display with easy-to-read white PV characters
● Input type: voltage input (PNP) / no-voltage input (NPN) selectable (through parameter setting), universal voltage input type available
● One-shot output time: 0.01 to 99.99 seconds (in 0.01 second increments)
AUTONICS
● Counting speeds: 1 cps / 30 cps / 300 cps / 2 kcps / 5 kcps
● Measure counting: multiply-mode / divide-mode
● Operation modes: count-up, count-down, count-up/down
AUTONICS
● Compact size: DIN W 48 × H 24 × L 54 mm
● Built-in lithium battery (operates without external power supply)
● Input signal types: no-voltage input, voltage input, AC/DC universal voltage input
AUTONICS
● All-in-one device including functions of HMI + PLC + I/O Module
● Logic programming memory: 8,000 steps
● Standard I/O: 16 input points, 16 output points (terminal block connector type / ribbon cable connector type)
AUTONICS
● Two mounting hole types and sizes
● Alarm (overheating) function: alarm output indicator (red LED), disconnect standard output, alarm output
● High heat dissipation efficiency with ceramic PCB and integrated heatsink
AUTONICS
● High resistance to impact and wear caused by contact with workpieces or wire brushes (sensor head/housing: stainless steel)
● Reduced risk of malfunction caused by aluminum chips
● Excellent noise immunity with specialized sensor IC
AUTONICS
● Display up to 400 characters per screen
● Save up to 500 screen pages
● Device monitoring: control and monitor various devices connected via communication ports
AUTONICS
● Flat, compact design (10 mm height) allows easy installation in limited spaces
● Excellent noise immunity with specialized sensor IC (DC types)
● Built-in reverse polarity protection circuit and overcurrent protection circuit (DC types)
AUTONICS
● High resistance to impact and wear caused by contact with workpieces or wire brushes (sensor head/housing: stainless steel)
● Reduced risk of malfunction caused by aluminum chips
● Excellent noise immunity with specialized sensor IC
AUTONICS
● High resistance to impact and wear caused by contact with workpieces or wire brushes (sensor head/housing: stainless steel)
● Reduced risk of malfunction caused by aluminum chips
● PTFE coating prevents malfunctions caused by welding spatter (spatter-resistant model)
AUTONICS
● High resistance to impact and wear caused by contact with workpieces or wire brushes (sensor head/housing: stainless steel)
● Reduced risk of malfunction caused by aluminum chips
● PTFE coating prevents malfunctions caused by welding spatter (spatter-resistant model)
